-- Your function definition begins here
function sband_dissectors(buffer, pinfo, tree, TC_TM_PROTOCOL, offset, instance)
    -- Define ProtoFields for s_sband_cmn_tm
    local f_timestamp2 = ProtoField.uint64("TC_TM_PROTOCOL.timestamp2", "Timestamp", base.DEC) 
    local f_temp_mcu = ProtoField.uint32("TC_TM_PROTOCOL.temp_mcu", "Temp MCU", base.DEC)
    local f_temp_fpga = ProtoField.uint32("TC_TM_PROTOCOL.temp_fpga", "Temp FPGA", base.DEC)
    local f_temp_xcvr = ProtoField.uint32("TC_TM_PROTOCOL.temp_xcvr", "Temp XCVR", base.DEC)
    local f_volt_vint = ProtoField.double("TC_TM_PROTOCOL.volt_vint", "Volt Vint", base.DEC)
    local f_volt_vaux = ProtoField.double("TC_TM_PROTOCOL.volt_vaux", "Volt Vaux", base.DEC)
    local f_volt_vbram = ProtoField.double("TC_TM_PROTOCOL.volt_vbram", "Volt Vbram", base.DEC)
    local f_volt_vpint = ProtoField.double("TC_TM_PROTOCOL.volt_vpint", "Volt Vpint", base.DEC)
    local f_volt_vpaux = ProtoField.double("TC_TM_PROTOCOL.volt_vpaux", "Volt Vpaux", base.DEC)
    local f_volt_vpdro = ProtoField.double("TC_TM_PROTOCOL.volt_vpdro", "Volt Vpdro", base.DEC)
    --local f_resv_chnl = ProtoField.uint8("TC_TM_PROTOCOL.resv_cgnl", "resvchnl", base.DEC)

    -- Define ProtoFields for s_sband_rx_tm
    local f_rx_cfg_frames = ProtoField.uint32("TC_TM_PROTOCOL.rx_cfg_frames", "RX Config Frames", base.DEC)
    local f_rx_cfg_detected = ProtoField.uint32("TC_TM_PROTOCOL.rx_cfg_detected", "RX Config Detected", base.DEC)
    local f_rx_cfg_rssi = ProtoField.float("TC_TM_PROTOCOL.rx_cfg_rssi", "RX Config RSSI", base.DEC)
    local f_rx_avg_rssi = ProtoField.float("TC_TM_PROTOCOL.rx_avg_rssi", "RX Average RSSI", base.DEC)
    local f_rx_cfg_freqerr = ProtoField.int32("TC_TM_PROTOCOL.rx_cfg_freqerr", "RX Config Frequency Error", base.DEC)
    local f_rx_cfg_carrier_lock = ProtoField.uint32("TC_TM_PROTOCOL.rx_cfg_carrier_lock", "RX Carrier Lock", base.DEC)
    local f_rx_frame_lock = ProtoField.uint32("TC_TM_PROTOCOL.rx_frame_lock", "RX Frame Lock", base.DEC)
    local f_rx_sir_min = ProtoField.uint32("TC_TM_PROTOCOL.rx_sir_min", "RX SIR Min", base.DEC)
    local f_rx_sir_max = ProtoField.uint32("TC_TM_PROTOCOL.rx_sir_max", "RX SIR Max", base.DEC)
    local f_rx_bch_block_cnt = ProtoField.uint32("TC_TM_PROTOCOL.rx_bch_block_cnt", "RX BCH Block Count", base.DEC)
    local f_rx_bch_err_cnt = ProtoField.uint32("TC_TM_PROTOCOL.rx_bch_err_cnt", "RX BCH Error Count", base.DEC)

    -- Define ProtoFields for s_sband_tx_tm
    local f_tx_cfg_frames = ProtoField.uint32("TC_TM_PROTOCOL.tx_cfg_frames", "TX Config Frames", base.DEC)
    local f_tx_cfg_pwr_rfl = ProtoField.float("TC_TM_PROTOCOL.tx_cfg_pwr_rfl", "TX Power RFL", base.DEC)

    -- For the main s_sband_periodic_tm structure
    --local f_cmn_tm = ProtoField.bytes("TC_TM_PROTOCOL.cmn_tm", "Common Time", base.HEX)
    --local f_rx_tm = ProtoField.bytes("TC_TM_PROTOCOL.rx_tm", "RX Time", base.HEX)
    --local f_tx_tm = ProtoField.bytes("TC_TM_PROTOCOL.tx_tm", "TX Time", base.HEX) 

    -- Add all fields to the protocol
    TC_TM_PROTOCOL.fields = {
        f_timestamp2, f_temp_mcu, f_temp_fpga, f_temp_xcvr, f_volt_vint, f_volt_vaux, f_volt_vbram, f_volt_vpint,
        f_volt_vpaux, f_volt_vpdro,
        f_rx_cfg_frames, f_rx_cfg_detected, f_rx_cfg_rssi, f_rx_avg_rssi, f_rx_cfg_freqerr, 
        f_rx_cfg_carrier_lock, f_rx_frame_lock, f_rx_sir_min, f_rx_sir_max, f_rx_bch_block_cnt, f_rx_bch_err_cnt,
        f_tx_cfg_frames, f_tx_cfg_pwr_rfl
    }


  local subtree = tree:add(TC_TM_PROTOCOL, buffer(), "SBAND")


    -- Now the loop for iterating over instances
    for i = 0, instance - 1 do
        local subtree1 = subtree:add(TC_TM_PROTOCOL, buffer(), "Instance " ..i)

        -- Offset for the different structs in s_sband_periodic_tm
        
        -- Dissect the s_sband_cmn_tm structure
        subtree1:add(f_timestamp2, buffer(offset, 8):le_uint64())
        offset = offset + 8 
        subtree1:add(f_temp_mcu, buffer(offset, 4):le_uint())  -- 4 bytes for int32
        offset = offset + 4
        subtree1:add(f_temp_fpga, buffer(offset, 4):le_uint()) -- 4 bytes for int32
        offset = offset + 4
        subtree1:add(f_temp_xcvr, buffer(offset, 4):le_uint()) -- 4 bytes for int32
        offset = offset + 4
        
        local data = buffer(offset, 4):le_uint()  -- First 4 bytes for z_vel
        local data1 = buffer(offset + 4, 4):le_uint() -- Next 4 bytes for z_vel
        local data3 = string.unpack("d", string.pack("<II", data1, data))
        subtree1:add(f_volt_vint, data3 )
        offset = offset + 8
       
        data = buffer(offset, 4):le_uint()  -- First 4 bytes for z_vel
        data1 = buffer(offset + 4, 4):le_uint() -- Next 4 bytes for z_vel
        data3 = string.unpack("d", string.pack("<II", data1, data))
        subtree1:add(f_volt_vaux, data3 )
        offset = offset + 8
        
        
        data = buffer(offset, 4):le_uint()  -- First 4 bytes for z_vel
        data1 = buffer(offset + 4, 4):le_uint() -- Next 4 bytes for z_vel
        data3 = string.unpack("d", string.pack("<II", data1, data))
        subtree1:add(f_volt_vbram, data3 )
        offset = offset + 8
        
        
        data = buffer(offset, 4):le_uint()  -- First 4 bytes for z_vel
        data1 = buffer(offset + 4, 4):le_uint() -- Next 4 bytes for z_vel
        data3 = string.unpack("d", string.pack("<II", data1, data))
        subtree1:add(f_volt_vpint, data3 )
        offset = offset + 8
        
        data = buffer(offset, 4):le_uint()  -- First 4 bytes for z_vel
        data1 = buffer(offset + 4, 4):le_uint() -- Next 4 bytes for z_vel
        data3 = string.unpack("d", string.pack("<II", data1, data))
        subtree1:add(f_volt_vpaux, data3 )
        offset = offset + 8
        
        
        data = buffer(offset, 4):le_uint()  -- First 4 bytes for z_vel
        data1 = buffer(offset + 4, 4):le_uint() -- Next 4 bytes for z_vel
        data3 = string.unpack("d", string.pack("<II", data1, data))
        subtree1:add(f_volt_vpdro, data3 )
        offset = offset + 8
       

        -- Dissect the s_sband_rx_tm structure 
        -- Handle the RX structure
        print("Recv chnl : 1")

        subtree1:add(f_rx_cfg_frames, buffer(offset, 4):le_uint())  -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_cfg_detected, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_cfg_rssi, buffer(offset, 4):le_float())  -- 4 bytes for float (f32)
        offset = offset + 4
        subtree1:add(f_rx_avg_rssi, buffer(offset, 4):le_float())  -- 4 bytes for float (f32)
        offset = offset + 4
        subtree1:add(f_rx_cfg_freqerr, buffer(offset, 4):le_uint()) -- 4 bytes for int32
        offset = offset + 4
        subtree1:add(f_rx_cfg_carrier_lock, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_frame_lock, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_sir_min, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_sir_max, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_bch_block_cnt, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_bch_err_cnt, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        
        --subtree1:add(f_recv_chnl,2)  -- 4 bytes for uint32
        
        print("Recv chnl - 2")
        subtree1:add(f_rx_cfg_frames, buffer(offset, 4):le_uint())  -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_cfg_detected, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_cfg_rssi, buffer(offset, 4):le_float())  -- 4 bytes for float (f32)
        offset = offset + 4
        subtree1:add(f_rx_avg_rssi, buffer(offset, 4):le_float())  -- 4 bytes for float (f32)
        offset = offset + 4
        subtree1:add(f_rx_cfg_freqerr, buffer(offset, 4):le_uint()) -- 4 bytes for int32
        offset = offset + 4
        subtree1:add(f_rx_cfg_carrier_lock, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_frame_lock, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_sir_min, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_sir_max, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_bch_block_cnt, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4
        subtree1:add(f_rx_bch_err_cnt, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        offset = offset + 4

        -- Dissect the s_sband_tx_tm structure
        --subtree1:add(f_tx_cfg_frames, buffer(offset, 4):le_uint()) -- 4 bytes for uint32
        --offset = offset + 4
        --subtree1:add(f_tx_cfg_pwr_rfl, buffer(offset, 4):le_float()) -- 4 bytes for float (f32)
        --offset = offset + 4
        
        
        
    end  -- This closes the `for` loop

end  -- This closes the function `sband_dissectors`